Rumely Companies' Agricultural Products

225
1931

Beginning with the blacksmith shop of German immigrant Meinrad Rumely (1823-1904), this successive family of firms invented and produced a line of agricultural equipment that played a vital role in the evolution of farming based on the muscle of humans and animals to one based on the power of the steam and ultimately the internal-combustion engine. The M. & J. Rumely Co. became the M. Rumely Co., and then the Advance Rumely Co. The Allis-Chalmers Company acquired the business in 1931. Although Allis-Chalmers is known for other products, such as gas engines and turbines, the company today is one of the country's largest producer of plows, discs, harrows, planters, self-propelled cotton strippers and cultivators. The 112-acre plant, which includes some of the original Rumely buildings, is located on Pine Lake Ave. A memorial stone, which includes ASME's landmark plaque, marks the original site of the blacksmith shop at La Porte Hospital (since 1972) on Lincolnway.

In the United States, the mechanization of farming took place mid-19th century, alongside the rapid developments of the Industrial Revolution. Profound changes have taken place since then. (From 1776 to 1908, the labor required to produce a bushel of wheat decreased from 2-3 hours to 10 minutes, according Dr. Edward Rumely in his autobiography. In the last 100 years, according to US Dept. of Agriculture's farm labor statistics, the farm population dropped from some 40 percent of the U.S. population to less than 3 percent.) Such equipment, from tractors and cultivators to a wide variety of harvesting machinery, has enabled an explosion in agricultural productivity for both food and fibers. In the process, agricultural mechanization also contributed to a massive shift from rural to urban, along with similarly massive changes in the nature of work, the consumer economy, and even the size and nature of families.

Like many similar stories during this time, the flow of technology followed the immigrants. In 1853, the two Rumely brothers, Meinrad and John, started their small shop in La Porte for the manufacture of corn shelters and horse-powered machines and the casting of irons for the railroad shops. By 1869, they were the town's largest employer. Meinrad Rumely had learned the millwright trade in France before he immigrated to the United States in 1848. He and his brother settled in La Porte after several years because there was a new railroad shop and yard being built to support the main line between New York and Chicago. (This shop moved to Elkhart in 1870.)

Meinrad had the ability to visualize complex machines and their mechanisms. He could organize and manage people, materials, and processes. The company quickly grew to 15-20 employees and was pouring 1 tone of castings a day. It produced the separator (threshing machine) in 1857, and two years later, won first prize for threshing at the Illinois State Fair in Chicago. The brothers soon began to produce stationary steam engines. In 1869, employees totaled 35 and sales were $50,000 a year.

In 1872, the Rumely Company developed a portable steam engine that could be horse-drawn from one farmyard to another and linked to a thresher with a driving belt. A decade later, it introduced a steam traction engine that pulled the threshing machine and water wagon. (The brothers had won eight first prizes in threshing by then.) In 1886 a new straw-burning engine was introduced. A new foundry opened in 1890. A year later a self-feeder was added to the line. By 1892, new boiler and blacksmith shops were added. A clover hulling machine was added in 1901.

At Meinrad Rumely's death in 1904, the company had 300 employees and had been granted at least five U.S. patents related to agricultural equipment. Four others would go on to provide key leadership in engineering and product development:

William Nicholas Rumely (1858-1936), who was a member of ASME (1885) and an honorary member of the American Society of Agricultural Engineers, led the design and development activity of steam traction engines (tractors) and separators. He also produced oil-burning tractors. He was granted at least eight U.S. patents related to agricultural equipment, including one anti-friction alloy (June 5, 1900, #650,911). Having attended Notre Dame University's preparatory school 1868-73, he studied mechanical drawing at Stevens Institute, Hoboken, N.J., in 1878-79.

Edward A. Rumely, M.D., joined the company in 1907 and became the driving force behind rapid growth prior to 1912.

John Alstyne Secor joined the company in 1908, having worked with his father (who built steam engines) and previously operated Secor Marine Propeller Company and manufactured engines and generators for General Power Company. He began his design work on the Kerosene Annie took eight months, with field trials beginning in 1909. He was granted nearly 20 U.S. patents, related mostly to engines.

William H. C. Higgins Jr. collaborated on patents with his uncle, John Secor, and held at least 13 patents of his own for internal combustion engines and carburetion equipment.

Type F Rumely Oil Pull

Type F Rumely Oil Pull kerosene tractor pulls a 4-bottom plow, about 1915

OilPulls

OilPulls in a row

Patented OilPull carburetor

Patented OilPull carburetor closeup

Ceremony

Unveiling plaques at the March 15, 2003, ceremony: Lyle E. Stephens, president of the American Society of Agricultural Engineers and Donald N. Zwiep, ASME past president, professor emeritus and department head emeritus of the University of Science and Technology

ASME plaque

ASME plaque

ASME plaque wording:

THE BLACKSMITH SHOP OF GERMAN IMMIGRANT MEINRAD RUMELY BECAME, IN SUCCESSION: THE M. & J. RUMELY CO.; THE M. RUMELY CO.; AND THE ADVANCE RUMELY CO. FROM THE OUTSET THIS FAMILY OF FIRMS INVENTED AND PRODUCED A LINE OF AGRICULTURAL EQUIPMENT THAT PLAYED A VITAL ROLE IN THE EVOLUTION OF FARMING BASED ON THE MUSCLE OF MEN AND ANIMALS TO ONE BASED ON THE POWER OF THE STEAM, AND ULTIMATELY THE INTERNAL-COMBUSTION ENGINE.

IN 1909 THE RUMELYS BEGAN EXPERIMENTING WITH A TRACTOR, FUELED BY INEXPENSIVE KEROSENE, THAT DISPENSED WITH THE STEAM TRACTOR'S BOILER AND NEED FOR WATER AND SOLID FUEL. THE "RUMELY OILPULL" WAS AN IMMEDIATE PRACTICAL AND COMMERCIAL SUCCESS, NEARLY 60,000 BEING BUILT.

225 Rumely Companies' Agricultural Products Rumley Oil Pull type H tractor

"Kerosene Annie" was revolutionary in tractor design and had worldwide impact. In his autobiography, Dr. Rumely wrote: "More human labor was spent for plowing than any other daily need. We were witnessing certain proof of a new epoch which opened the world's last great power market to mechanical motors. Other internal combustion engine tractors would follow, but with our first successful one, we had a head start."

In 1809 when Rumely had begun experimenting with a tractor fueled by inexpensive kerosene (which dispensed with the steam tractor's boiler and need for water and solid fuel), it would soon eliminate the need for some 18 out of 25 million horses then in the United States. Dr. Rumely wrote: "It liberated one acre in every five heretofore required for animal subsistence. The estimated 50 million acres no longer needed for the feed of farm horses covered slightly more than the combined cultivated areas of Kansas and Nebraska."

The "Rumely Oil-Pull" helped open the Great Plains to cultivation and was an immediate practical and commercial success, nearly 60,000 being built. The huge success of Rumely's oil-pull tractor in 1908 reflected the success of the United States in general.

From its beginnings as a foundry and machine shop, the Rumelys served the railroads. Over the decades, other products have included baby carriages, bicycles, wagons, wool, bread, slicing machines for the food industry, pianos, radiators, office furniture, picture frames, doors and windows, air ventilating machinery, machine tools, castings for jet engines, boxes, industrial film, plastic materials, rollers for printing presses, plastic containers, cans, and airplane wings and tanks during the years of World War II. As Allis-Chalmers, it closed its La Porte plant in 1982. The La Porte County Historical Museum and the La Porte County Library have collections on Rumely.

The Rumely family (which owned, in some form, the companies until 1915) celebrated 150 years of the founding of the Rumely companies on March 15, 2003. At that time, ASME International, the American Society of Agricultural Engineers, and the Indiana Historical Bureau presented plaques recognizing the companies' historical significance.

 
 

For More Information

1007 Lincolnway
La Porte, IN 46350
219-326-1234

Plaque location:

Plaque on front lawn of La
Porte Hospital, site of the
original blacksmith shop of
Meinrad Rumely; plaque
presented to La Porte Regional
Health System

Useful Links

Rumely Collectors
http://www.rumely.com

Ceremony Notes

March 15, 2003; Joint ceremony (separate plaques) by ASME, ASAgE, and Indiana Historical Bureau; ASME past president Don Zwiep to present the plaque to La Porte Regional Health System, represented by county historian Fern Eddy Schultz. ASME's St. Joseph Valley Section in Region VI (Central) sponsored ASME's participation.