albert shih, Ph.D. (2026)
Editor-in-Chief
Department of Mechanical Engineering
University of Michigan
500 S. State Street
Ann Arbor, MI 48109
P: (734) 647-1766
E: shiha@umich.edu
 
ASSOCIATE EDITORS
  • ADDITIVE MANUFACTURING, ADVANCED MATERIALS AND PROCESSING, NONTRADITIONAL MANUFACTURING PROCESSES, POWDER PROCESSING
  • Bruno Azeredo, Ph.D. (2027)
    Arizona State University, USA
SUSTAINABLE MANUFACTURING, PRODUCTION SYSTEMS OPTIMIZATION, PROCESS ENGINEERING
Sara Behdad, Ph.D. (2024)
University of Florida, USA
  • COMPUTER-INTEGRATED MANUFACTURING; CONTROL AND AUTOMATION; CYBER-PHYSICAL SYSTEMS IN MANUFACTURING; PRODUCTION SYSTEMS OPTIMIZATION
  • Qing Chang, Ph.D. (2026)
    University of Virginia, USA
BIOMEDICAL MANUFACTURING; ADDITIVE MANUFACTURING; MICROMANUFACTURING, METROLOGY
Robert Chang, Ph.D. (2026)
Stevens Institute of Technology, USA
ADDITIVE MANUFACTURING AND DIGITAL MANUFACTURING
Yong Chen, Ph.D. (2025)
University of Southern California, USA
LASER PROCESSING; ADDITIVE MANUFACTURING; NONTRADITIONAL MANUFACTURING
Gary Cheng, Ph.D. (2026)
Purdue University, USA
MACHINING PROCESSES; SENSING, MONITORING, AND DIAGNOSTICS; PROCESS ENGINEERING
Andrew Henderson, Ph.D. (2027)
Hendtech LLC, USA
ADDITIVE AND SEMICONDUCTOR MANUFACTURING; SENSING, MONITORING AND DIAGNOSTICS; CYBER MANUFACTURING
Ran Jin, Ph.D. (2026)
Virginia Polytechnic Institute and State University, USA
MACHINING PROCESSES; MACHINE TOOL DYNAMICS; MODELING AN SIMULATION; DATA SCIENCE-ENHANCED MANUFACTURING
Xiaoliang Jin, Ph.D. (2026)
University of British Columbia, Canada
 
  • MACHINING PROCESSES; PRODUCTION SYSTEMS OPTIMIZATION; SENSING, MONITORING, AND DIAGNOSTICS
  • Jaydeep Karandikar, Ph.D. (2026)
  • Oak Ridge National Laboratory, USA
  • ELECTRICAL AND ELECTROCHEMICAL MACHINING, MACHINING PROCESSES, GRINDING AND ABRASIVE PROCESSES

    Andreas Klink, Ph.D. (2025)
    RWTH Aachen University, Germany

  • ADDITIVE MANUFACTURING, WELDING AND JOINING
  • JingJing Li, Ph.D. (2026)
  • Pennsylvania State University, USA
  • LASER PROCESSES; MODELING AND SIMULATION; SHEET AND TUBE METAL FORMING
  • Wayne Li, Ph.D. (2025)
  • The Boeing Company, USA
  • MECHANICS OF MATERIALS; ADDITIVE MANUFACTURING; BIO-INSPIRED ENGINEERING; COMPOSITES
  • Yaning Li, Ph.D. (2027)
  • Northeastern University, USA
  • ADDITIVE MANUFACTURING, LASER PROCESSES, ADVANCED MATERIALS AND PROCESSING, MACHINING PROCESSES
  • Dong Lin, Ph.D. (2028)
  • Oregon State University, USA
  • GRINDING AND ABRASIVE PROCESSES; SUSTAINABLE MANUFACTURING
  • Barbara S. Linke, Ph.D. (2026)
  • University of California Davis, USA
  • LASER PROCESSES; BULK DEFORMATION PROCESSES (E.G., EXTRUSION, FORGING, WIRE DRAWING, ETC.); ADDITIVE MANUFACTURING; SHEET AND TUBE METAL FORMING
  • Arif Malik, Ph.D. (2028)
  • The University of Texas at Dallas, USA
  • SUSTAINABLE MANUFACTURING
  • Nehika Mathur, Ph.D. (2028)
  • NIST US DoC, USA
  • METAL FORMING (MICRO & MACRO); TRIBOLOGY FOR MANUFACTURING PROCESSES; PLASTICITY
  • Gracious Ngaile, Ph.D. (2027)
  • North Carolina State University, USA
  • CONTROL AND AUTOMATION; SENSING, MONITORING, AND DIAGNOSTICS; ADDITIVE MANUFACTURING
  • Chinedum E. Okwudire, Ph.D. (2027)
    University of Michigan, USA
  • METAL ADDITIVE MANUFACTURING
  • Prahalada Rao, Ph.D. (2027)
    Virginia Polytechnic University and State University, USA
  • MACHINING; MANUFACTURING; HYBRID MANUFACTURING
  • Christopher Saldaña, Ph.D. (2026)
    Georgia Institute of Technology, USA
  • CONTROL AND AUTOMATION; MACHINE TOOL DYNAMICS; MACHINE PROCESSSES
  • Burak Sencer, Ph.D. (2027)
    Oregon State University, USA
  • MACHINING PROCESSES; ADVANCED MATERIALS AND PROCESSING; TRIBOLOGY IN MANUFACTURING
  • Vincent Wagner, Ph.D. (2027)
    École Nationale d'Ingénieurs de Tarbes, France
  • ADDITIVE MANUFACTURING, CONTROL AND AUTOMATION, MICRO- AND NANO-MACHINING AND PROCESSING, SENSING, MONITORING AND DIAGNOSTICS
  • Chengying "Cheryl" Xu, Ph.D. (2025)
    North Carolina State University, USA
SPONSORED BY Design Engineering DIVISION
OFFICERS OF THE ASME
  • Lester K. Su
    President
  • Thomas Costabile
    Executive Director
  • Tara McMahan
    Secretary/Treasurer
PUBLISHING STAFF
  • Christine M. Reilley
    Managing Director, Publishing
  • Tara Smith
  • Manager, Journal and Publishing Operations
  •  
PAST EDITORS
  • Y. Lawrence Yao
  • Kornel F. Ehmann
  • Shiv G. Kapoor
  • David A. Dornfeld
TECHNICAL COMMITTEE ON PUBLICATIONS AND COMMUNICATIONS
  • Shapour Azarm
    Chair
  • Yogendra K. Joshi
    Vice-Chair
  • Beth Winkelstein
    Chair, Board of Editors
 

Transactions of the ASME, Journal of Manufacturing Science and Engineering (ISSN 1096-6668) is published monthly by ASME, 290 West Mount Pleasant Avenue, Suite 1400, Livingston, NJ 07039. Periodical postage paid in Paterson, NJ and  additional mailing offices. Send address changes to Transactions of the ASME, Journal of Manufacturing Science Engineering, c/o ASME, 290 West Mount Pleasant Avenue, Suite 1400, Livingston, NJ 07039.

Changes of address must be received at Society headquarters seven weeks before they are to be effective. Please send old label and new address.

Statement from by-laws. The Society shall not be responsible for statements or opinions advanced in papers or … printed in its publications (B7.1, Para 3). COPYRIGHT © by The American Society of Mechanical Engineers.
All rights reserved. “ASME” and the above ASME symbols are registered trademarks of The American Society of Mechanical Engineers.  No part of this document may be copied, modified, distributed, published, displayed, or otherwise reproduced in any form or by any means, electronic, digital, or mechanical, now known or hereafter invented, without the express written permission of ASME. No works derived from this document or any content therein may be created without the express written permission of ASME.  Using this document or any content therein to train, create, or improve any artificial intelligence and/or machine learning platform, system, application, model, or algorithm is strictly prohibited. For authorization to photocopy material for internal or personal use under those circumstances not falling within the fair use provisions of the Copyright Act, contact the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923, tel: +1-978-750-8400, www.copyright.com. Request for special permission to bulk copying should be addressed to Reprints /Permissions Department. Canadian Goods & Services Tax Registration #126148048.

Subscriptions: Rates/Orders - Contact ASME Customer Care at
Email: customercare@asme.org
Phone: 1-800-THE-ASME or 1-646-616-3100 (outside the Americas)
Mail: 290 West Mount Pleasant Avenue, Suite 1400, Livingston, NJ 07039.

ASME Journals Claims Policy: Please make claims for missing issues in writing (email) to customercare@asme.org within six months of print date (9 months for subscribers outside the USA and Canada). Issues claimed after this time will be considered replacement copies billed at the single copy rate. Please note that replacement copies are limited. Any questions can be directed to 1-800-843-2763.

Indexing Information: Current List

Single/Multi-Site Licensing: Contact David Kurywchak, Senior Managing Director, Sales at kurywchakD@asme.org