LANCE MANUEL, PH.D. (2026)
Editor-in-Chief
University of Texas at Austin
Dept. of Civil, Architectural and Environmental Engineering
University of Texas at Austin
Austin, TX 78712
P: 512-232-5691
E:
lmanuel@mail.utexas.edu
ASSOCIATE EDITORS
OFFSHORE TECHNOLOGY
- Bin Liu, Ph.D. (2027)
Wuhan University of Technology, China
- Wenhua Zhao, Ph.D. (2026)
University of Western Australia, Australia
STRUCTURES, SAFETY, AND RELIABILITY
- Michaela Gkantou, Ph.D. (2028)
Liverpool John Moores University, UK
Zhiyu Jiang, Ph.D. (2027)
- University of Agder, Norway
- Binbin Li, Ph.D. (2027)
Tsinghua University, China
- Ying Min Low, Ph.D. (2025)
- National University of Singapore, Singapore
- Enzo Marino, Ph.D. (2028)
University of Florence, Italy
Francisco Leonel Silva-González, Ph.D. (2025)
- Mexican Petroleum Institute, México
- Erik Vanem, Ph.D. (2026)
DNV GL Strategic Research & Innovation,
Norway
MATERIALS TECHNOLOGY
- José A. F. O. Correia, Ph.D. (2027)
University of Porto, Portugal
Dimitrios Pavlou, Ph.D. (2026)
- University of Stavanger, Norway
OCEAN ENGINEERING
- Masoud Hayatdavoodi, Ph.D. (2027)
University of Dundee, UK
- Seeninaidu Nallayarasu, Ph.D. (2026)
- Indian Institute of Technology Madras, India
- Bing Ren, Ph.D. (2028)
Ningbo University, China
Yanlin Shao, Ph.D. (2025)
- Technical University of Denmark, Denmark
- Ryota Wada, Ph.D. (2028)
The University of Tokyo, Japan
-
OCEAN RENEWABLE ENERGY
- Erin E. Bachynski-Polić, Ph.D. (2025)
Norweigan University of Science and
Technology (NTNU), Norway
- Ryan G. Coe, Ph.D. (2027)
Sandia National Laboratories, USA
- Adi Kurniawan, Ph.D. (2026)
The University of Western Australia, Australia
Sho Oh, Ph.D. (2026)
Nippon Kaiji Kyokai (ClassNK), Japan
- Kelley M. Ruehl, Ph.D. (2026)
- Sandia National Laboratories, USA
Zili Zhang, Ph.D. (2026)
- Tongji University, China
PIPELINES, RISERS, and SUBSEA SYSTEMS
- José Renato Mendes de Sousa, Ph.D. (2027)
Federal University of Rio de Janeiro, Brazil
- Celso Morooka, Ph.D. (2027)
University of Campinas, Brazil
- Chen Shi, Ph.D. (2025)
China University of Petroleum (East China), China
COMPUTATIONAL FLUID DYNAMICS AND VORTEX-INDUCED VIBRATION
- Ignazio Maria Viola, Ph.D. (2026)
- University of Edinburgh, UK
- Jun Zang, Ph.D. (2025)
University of Bath, UK
OFFSHORE GEOTECHNICS
- Hanping Hong, Ph.D. (2025)
- The University of Western Ontario, Canada
- Sheng-Dong Jeng, Ph.D. (2026)
Griffith University, Australia
- Zefeng Zhou, Ph.D. (2027)
NGI Trondheim, Norway
ARCTIC ENGINEERING
- Mojtaba Mokhtari, Ph.D. (2027)
Norwegian University of Science and Technology, Norway
Jani Romanoff, Ph.D. (2026)
- Aalto University, Finland
OCEAN SPACE UTILIZATION
- Barbara Zanuttigh, Ph.D. (2028)
University of Bologna, Italy
OCEAN, OFFSHORE & ARCTIC ENGINEERING DIVISION
Celso P. Pesce
Chair
OFFICERS OF THE ASME
- Susan Ipri-Brown
President
- Thomas Costabile
Executive Director
- Tara McMahan
Secretary/Treasurer
PUBLISHING STAFF
- Christine M. Reilley
Managing Director, Publishing
- Tara Smith
- Manager, Journal and Publishing Operations
Erica Hodge
- Journal Production Specialist
PAST EDITORS
- S. K. Chakrabarti
- S. Liu
- S. Yim
TECHNICAL COMMITTEE ON PUBLICATIONS AND COMMUNICATIONS
- Shapour Azarm
Chair
- Yogendra K. Joshi
Vice-Chair
- Beth Winklestein
Chair, Board of Editors
Transactions of the ASME, Journal of Offshore Mechanics and Arctic Engineering (ISSN 0892-7219) is published bimonthly by ASME, 150 Clove Road, Little Falls, NJ 07424-2139. Send address changes to Transactions of the ASME, Journal of Offshore Mechanics and Arctic Engineering, c/o ASME, 150 Clove Road, 6th Floor, Little Falls, NJ 07024.
Changes of address must be received at Society headquarters seven weeks before they are to be effective. Please send old label and new address.
Statement from by-laws. The Society shall not be responsible for statements or opinions advanced in papers or … printed in its publications (B7.1, Para 3). COPYRIGHT © 2025 by The American Society of Mechanical Engineers. “All rights reserved. “ASME” and the above ASME symbols are registered trademarks of The American Society of Mechanical Engineers. No part of this document may be copied, modified, distributed, published, displayed, or otherwise reproduced in any form or by any means, electronic, digital, or mechanical, now known or hereafter invented, without the express written permission of ASME. No works derived from this document or any content therein may be created without the express written permission of ASME. Using this document or any content therein to train, create, or improve any artificial intelligence and/or machine learning platform, system, application, model, or algorithm is strictly prohibited.” For authorization to photocopy material for internal or personal use under those circumstances not falling within the fair use provisions of the Copyright Act, contact the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923, tel: +1-978-750-8400, www.copyright.com. Request for special permission to bulk copying should be addressed to Reprints /Permissions Department. Canadian Goods & Services Tax Registration #126148048.
Subscriptions: Rates/Orders - Contact ASME Customer Care at
Email: customercare@asme.org
Phone: 1-800-THE-ASME or 1-646-616-3100 (outside the Americas)
Fax: 1-973-882-5155
Mail: 150 Clove Road, 6th Floor, Little Falls, NJ 07424.
ASME Journals Claims Policy: Please make claims for missing issues in writing (email) to customercare@asme.org within 6 months of print date (9 months for subscribers outside the USA and Canada). Issues claimed after this time will be considered replacement copies billed at the single copy rate. Please note that replacement copies are limited. Any questions can be directed to 1-800-843-2763.
Indexing Information: Current List
Single/Multi-Site Licensing: Contact David Kurywchak, Managing Director, Third Party Sales at KurywchakD@asme.org
Reprints: Contact Tamiko Fung at fungt@asme.org