CAROLYN CONNER SEEPERSAD (2028)
Editor-in-Chief
Walker Department of Mechanical Engineering
The University of Texas at Austin
204 E. Dean Keeton St., Stop C2200
Austin, TX 78712
E: editor@asmejmd.org
 
haijun su (2029)
Editor, Mechanisms
Department of Mechanical and Aerospace Engineering
The Ohio State University
201 W. 19th Avenue
Columbus, OH 43210
P: 614-292-2239
E: su.298@osu.edu
ASSOCIATE EDITORS
DESIGN AUTOMATION
  • Douglas Allaire, Ph.D. (2025)
  • Texas A&M University, USA
  • Shikui Chen, Ph.D. (2025)
  • State University of New York at Stonybrook, USA
  • Bryony DuPont, Ph.D. (2026)
  • Oregon State University, USA
  • Xu Han, Ph.D. (2025)
  • Hebei University of Technology, China
  • Babak Heydari, Ph.D. (2026)
  • Northeastern University, USA
  • Christopher Hoyle, Ph.D. (2025)
    Oregon State University, USA
  • Ikjin Lee, Ph.D. (2027)
  • Korea Advanced Institute of Science and Technology, South Korea
  • Julián A. Norato, Ph.D. (2026)
  • University of Connecticut, USA
  • Jitesh Panchal, Ph.D. (2025)
  • Purdue University, USA
  • Zhenghui Sha, Ph.D. (2026)
  • University of Texas, USA
  • Xueguan Song, Ph.D. (2026)
  • Dalian University of Technology, China
  • Pingfeng Wang, Ph.D. (2025)
  • University of Illinois at Urbana Champaign, USA
  • Kate Whitefoot Ph.D. (2025)
  • Carnegie Mellon University, USA
  • Zhimin Xi, Ph.D. (2025)
  • Rutgers University, USA
  • Jie Zhang, Ph.D. (2027)
  • University of Texas at Dallas, USA
  • Bin Zi, Ph.D. (2027)
  • Hefei University of Technology, China
  •  
DESIGN EDUCATION
DESIGN OF MECHANISMS AND ROBOTIC SYSTEMS
  • Yan Chen, Ph.D. (2025)
  • Tianjin University, China
  • Alfonso Fuentes-Aznar, Ph.D. (2027)
  • Rochester Institute of Technology (RIT), USA
  • Girish Krishnan, Ph.D. (2027)
  • University of Illinois, USA
  • Xin-Jun Liu, Ph.D. (2027)
  • Tsinghua University, China
  • Leila Notash, Ph.D. (2027)
  • Queen's University, Canada
  • Anurag Purwar, Ph.D. (2027)
  • Stony Brook University, USA
  • Chenkun Qi, Ph.D. (2026)
  • Shanghai Jiao Tong University, China
  • Audrey A. Sedal, Ph.D. (2028)
  • McGill University, Canada
  • Dan Zhang, Ph.D. (2027)
  • Hong Kong Polytechnic University, Hong Kong
  • Ketao Zhang, Ph.D. (2025)
  • Queen Mary University of London, UK
  •  
  • DESIGN THEORY AND METHODOLOGY
  • Katherine K. Fu, Ph.D. (2027)
  • Georgia Institute of Technology, USA
  • Mark Fuge, Ph.D. (2027)
  • ETH Zurich, Switzerland
  • Astrid Layton, Ph.D. (2026)
  • Texas A&M University, USA
  • Christopher McComb, Ph.D. (2025)
  • Carnegie Mellon University, USA
  • Jessica Menold, Ph.D. (2026)
  • Pennsylvania State University, USA
  • Eun Suk Suh, Ph.D. (2025)
  • Seoul National University, Korea
  • Christine Toh, Ph.D. (2025)
  • University of Nebraska at Omaha, USA
POWER TRANSMISSION AND GEARING
  • Sheng Li, Ph.D. (2026)
  • Wright State University, USA
  • David Talbot, Ph.D. (2027)
    The Ohio State University, USA
DESIGN FOR MANUFACTURING & LIFE CYCLE
  • Sara Behdad, Ph.D. (2027)
  • University of Florida, USA
  • Serena Graziosi, Ph.D. (2027)
  • Politecnico di Milano, Italy
  • Chao Hu, Ph.D. (2025)
  • University of Connecticut, USA
  • Yaoyao Fiona Zhao, Ph.D. (2024)
  • McGill University, Canada
 


DESIGN ENGINEERING EXECUTIVE COMMITTEE
  • Scott Ferguson
    Chair
OFFICERS OF THE ASME
  • Susan Ipri-Brown
    President
  • Thomas Costabile
    Executive Director
  • Tara McMahan
    Secretary/Treasurer
PUBLISHING STAFF
  • Christine M. Reilley
    Managing Director, Publishing
  • Tara Smith
  • Manager, Journal and Publishing Operations
  • Jennifer L. Smith
  • Production Specialist, Journals
PAST EDITORS
  • Wei Chen
  • Shapour Azarm
  • Panos Y. Papalambros
  • J. Michael McCarthy
  • Lung-Wen Tsai
  • Bahram Ravani
  • Kenneth J. Waldron
  • Steven Dubowsky
TECHNICAL COMMITTEE ON PUBLICATIONS AND COMMUNICATIONS
  • Shapour Azarm
    Chair
  • Yogendra K. Joshi
    Vice-Chair
  • Beth Winkelstein
    Chair, Board of Editors

Transactions of the ASME, Journal of Mechanical Design (ISSN 1050-0472) is published monthly by ASME, 150 Clove Road, 6th Floor, Little Falls, NJ 07424-2139. Periodical postage paid in Paterson, NJ and additional mailing addresses. Send address changes to Transactions of the ASME, Journal of Mechanical Design, c/o ASME, 150 Clove Road, 6th Floor Little Falls, NJ 07424-2139.

Changes of address must be received at Society headquarters seven weeks before they are to be effective. Please send old label and new address.

Statement from by-laws. The Society shall not be responsible for statements or opinions advanced in papers or … printed in its publications (B7.1, Para 3). COPYRIGHT © by The American Society of Mechanical Engineers.
All rights reserved. “ASME” and the above ASME symbols are registered trademarks of The American Society of Mechanical Engineers.  No part of this document may be copied, modified, distributed, published, displayed, or otherwise reproduced in any form or by any means, electronic, digital, or mechanical, now known or hereafter invented, without the express written permission of ASME. No works derived from this document or any content therein may be created without the express written permission of ASME.  Using this document or any content therein to train, create, or improve any artificial intelligence and/or machine learning platform, system, application, model, or algorithm is strictly prohibited. For authorization to photocopy material for internal or personal use under those circumstances not falling within the fair use provisions of the Copyright Act, contact the Copyright Clearance Center (CCC), 222 Rosewood Drive, Danvers, MA 01923, tel: +1-978-750-8400, www.copyright.com. Request for special permission to bulk copying should be addressed to Reprints /Permissions Department. Canadian Goods & Services Tax Registration #126148048.

Subscriptions: Rates/Orders - Contact ASME Customer Care at
Email: customercare@asme.org
Phone: 1-800-THE-ASME or 1-646-616-3100 (outside the Americas)
Mail: 150 Clove Road, 6th Floor, Little Falls, NJ 07424.

ASME Journals Claims Policy: Please make claims for missing issues in writing (email) to customercare@asme.org within six months of print date (9 months for subscribers outside the USA and Canada). Issues claimed after this time will be considered replacement copies billed at the single copy rate. Please note that replacement copies are limited. Any questions can be directed to 1-800-843-2763.

Indexing Information: Current List

Single/Multi-Site Licensing: Contact Davi Kurywchak, Senior Managing Director, Sales at KurywchakD@asme.org

Reprints: Contact Tamiko Fung at fungt@asme.org.