Ronald W. Haupt, P.E., is a consulting piping engineer for Pressure Piping Engineering Associates, Inc. He has over 40 years of professional experience in the design and analysis of industrial process and energy-related structures, equipment, piping, pipelines, and supports. Mr. Haupt is a member of the ASME B31 Code for Pressure Piping Standard Committee, the B31.1 Power Piping Section Committee, B31.3 Process Piping Section Committee, and other ASME and national codes and standards committees.
Joe W. Frey P.E., is a consulting engineer with over 37 years of experience in the installation, inspection, maintenance, and repair of piping systems. He has specialized in emergency response to failures, providing fitness for service (FFS) evaluations, repair plans, and path forward assistance for catastrophic failures in piping and coal silos. Mr. Frey also has extensive experience in fire damage assessment in refineries and chemical plants. He is currently the Vice Chair of the B31 Code committee, past chair of B31.1, and a member of numerous other piping code subcommittees. Mr. Frey has been instrumental in sponsoring changes in the Code requirements addressing piping maintenance.
John P. Swezy, Jr. has over 35 years of experience in steam and combustion driven prime mover electrical generation plants and associated engineering auxiliary systems, and over 20 years of experience in developing and implementing detailed procedures, work instructions, and QC programs for design, welded fabrication, repairs, and alterations of pressure equipment following ASME, B31, NBIC, API, DOT and various International Codes and Standards. He also has extensive experience in the area of nondestructive examination.
Mr. Swezy has been a member of various ASME Codes & Standards Committees since 1996. He is a National Board Commissioned Boiler and Pressure Vessel Inspector and an American Welding Society Certified Welding Inspector (CWI). He is recognized for his expertise with the ASME Code rules of Section VIII, Divisions 1 and 2 as they apply to toughness, fabrication, and examination of pressure vessels. He is past Chair of the Subgroup on Toughness, newly elected as Chair of the Subgroup on Fabrication and Examination, and member of the Standards Committee for Pressure Vessels. He is also a member of the Standards Committee for Welding, Brazing, and Fusing; the ASME B31 Piping Standards Committee; and is Chair of the B31 Fabrication and Examination Technical Committee. John was presented the ASME Dedicated Service Award in 2013.
Bob Wilson is an Engineering Consultant with R.B. Wilson & Associates Ltd. Dundas, Ontario, and former Engineering Professor at Sheridan College. He is a member of the B31.1 Power Piping Section Sub Group on Design. Mr. Wilson has taught piping design and engineering courses for 30 years. He has been involved with the design, analysis, layout and support of piping systems since 1963, with petrochemical, power, steel, mining & processing companies in North America and Europe and is currently working as a Piping Stress Engineer with experience in Caesar II, Caepipe and Autopipe analysis programs.
Hugo Julien, P.Eng., began his career, in the field of pressure equipment, pipeline and storage tanks, as Designer and Quality Manager at HC Vidal Ltd. (1998 to 2002) a pressure equipment and boiler manufacturer. He then worked as Quality Systems Manager at Xebec, Inc. (2002 to 2007) another pressure equipment manufacturer. From 2007 to 2019, he has been the Mechanical Integrity Advisor at GCM Consultants, an engineering firm. Since January 2019, he has been working for CEP Forensic as a Forensic Engineer, where he investigates the causes of rupture, leakage, explosion, etc.
An active associated member CSA B51, he is a certified API 510, API 570, API 571, and CSA W178.2 Level II (CSA B31.3, ASME W47.1/W59, and CSA Z662) inspector. Mr. Julien graduated from l'École Polytechnique of Montréal (1997) in Mechanical Engineering.
Jim E. Meyer, P.E., has over 45 years of experience in refining petrochemical, chemical, power generation and industrial facilities. He is a principal engineer at CDM Smith, a full service engineering and architectural firm, located in Wadsworth Ohio. Jim is experienced in overall project coordination/management, pressure equipment, piping design, analysis, specifications, support design, mechanical system requirements and documentation requirements. In particular, areas of his technical competence include ASME piping and pressure vessel codes, stress analysis, field troubleshooting piping system support, vibration, and expansion problems.
Jim is a member of ASME and has been involved in the ASME B31.1 and ASME B31.3 Section committees for over 40 years. He is currently, Chair of the ASME B31 Standards Committee, Chair of the B31 Mechanical Design Committee and serves on the ASME Board on Pressure Technology Codes and Standards. Jim has also served as Chair of the ASME B31.3 Process Piping Section Committee and Chair of ASME B31.1 Power Piping Code Section Committee.
Most recently, Jim co-authored chapters in the ASME Boiler and Pressure Vessel Companion Guide, 5th Edition, covering the ASME B31.1 Power Piping Code and the B31.3 Process Piping Code. Past projects and work experience has involved major oil refineries, petrochemical plants, fossil, nuclear, solar and alternative energy generation, as well as cryogenic and vacuum test facilities.