Stories Slide
Events Slide
Stories Slide
The Robotic Kitchen Is Cooking

The Robotic Kitchen Is Cooking

Moley Robotics aims to produce a consumer version of a robotic kitchen that will allow you to order food on your mobile device and have it ready and waiting when you arrive home.

Read the article
South Dakota State Wins Second Regional Human Powered Vehicle Challenge at E-Fest East

South Dakota State Wins Second Regional Human Powered Vehicle Challenge at E-Fest East

For the second time in less than a month, South Dakota State University was named the overall winner of the ASME Human Powered Vehicle Challenge (HPVC) at E-Fest East.

Read the article
Teams from Europe and Africa Compete at ISHOW Kenya

Teams from Europe and Africa Compete at ISHOW Kenya

Nine teams of social entrepreneurs from across Europe and Africa gathered in Nairobi earlier this month to compete in ASME’s 2018 Innovation Showcase (ISHOW) Kenya.

Read the article

Design & Manufacturing

The Latest

  • Article

    Nano: Engineering’s New Frontier

    Nanotechnology is the new frontier of engineering, creating endless possibilities for manufacturing, microfluidics, robotics, biomedicine, energy, and more.

    March 12, 2018

    Read the article

    More on Design & Manufacturing

  • Journals

    CALL FOR PAPERS: Journal of Vibration and Acoustics

    The ASME Journal of Vibration and Acoustics is currently accepting manuscripts for a special issue on bio-inspired systems, which is expected to be published in April 2019. The deadline to submit a paper for the special issue is June 1, 2018.

    May 07, 2018

    Submit a manuscript

    More on the Journal

  • Event

    ASME to Offer Additive Manufacturing Events During LiveWorx Conference in Boston

    ASME will hold several special workshops and sessions related to the subject of additive manufacturing — one of the five core technologies the Society has identified as key to its overall strategy — during the upcoming LiveWorx 18 Technology Conference in Boston.

    June 04, 2018

    Read the article

    Register for Liveworx

  • AABME

    Bioprinting Better Artificial Joints

    Lorenzo Moroni and his team at MERLN in The Netherlands, use 3D bioprinting to create "smart scaffolds," which they seed with patient stem cells and growth factors to produce structures that behave like natural cartilage tissues.

    June 04, 2018

    Read the article

    More from AABME

  • E-Fest

    Three Teams Named Grand-Prize Winners at ASME Innovation Showcase (ISHOW) in India

    The inventors of a device for learning Braille, a medical screening monitor for diabetes patients, and a wearable device that records and relays infant diagnostic information were selected as winners at the 2018 ISHOW in India.

    May 07, 2018

    Read the article

    More on ISHOW

  • SPONSORED

    How Computational Acoustics Drives Innovative Design Solutions

    The COMSOL News Special Edition: Acoustics, published as a Special Advertising Section in Mechanical Engineering magazine earlier this year, celebrates designers, engineers and researchers working in the field of acoustics.

    April 30, 2018

    Get the free articles

    More from ME Magazine

  • Journals

    CALL FOR PAPERS: Journal of Vibration and Acoustics

    The ASME Journal of Vibration and Acoustics is currently accepting manuscripts for a special issue on bio-inspired systems, which is expected to be published in April 2019. The deadline to submit a paper for the special issue is June 1, 2018.

    May 07, 2018

    Submit a manuscript

    More on the Journal

  • Landmarks

    Knight Foundry Redesignated as an ASME Landmark

    The Knight Foundry in Sutter Creek, Calif., one of the few water-powered foundries in the United States, was recently redesignated as an ASME Historic Mechanical Engineering Landmark.

    April 23, 2018

    Read the article

    More on ASME Landmarks

  • E-Fest

    The Energy of Engineering Drives E-Fest East

    Young engineers from across the country innovate, compete, network, land that dream job, and, of course, have a whole lot of fun at E-Fest East at Penn State.

    April 23, 2018

    Read the article

    More from E-Fest

  • Landmarks

    Single Crystal Turbine Blade Named ASME’s 265th Landmark

    Last month, Pratt & Whitney’s single crystal turbine blade was designated as an ASME Historic Mechanical Engineering Landmark at a ceremony at the New England Air Museum in Windsor Locks, Conn.

    March 26, 2018

    Read the article

    More on ASME Landmarks

  • AABME

    From AABME: Augmented Reality Gives New Sight to Bioengineers, Doctors

    More bioengineers are taking a serious look at how virtual and augmented reality tools, like Microsoft's HoloLens can expand their design capabilities, especially for medical imaging and computation, simulations, and implants and devices.

    April 09, 2018

    Read the article

    More from AABME

  • Article

    NASA’s Alien Tire

    NASA’s new “superelastic tire” is designed to thrive on inhospitable planets such as Mars, where the rocky terrain is hard to maneuver and temperatures can reach -130 °C.

    March 05, 2018

    Read the article

    More on Design & Manufacturing

  • Video

    VIDEO: Journal of Computing and Information Science in Engineering

    Publishes articles related to algorithms, computational methods, computing infrastructure, computer-interpretable representations, human-computer interfaces, information science, and/or system architectures to improve product and system lifestyle

    April 09, 2018

    Watch the video

    More on the Journal

  • Conference

    EPRI Expert Workshop to Be Held at 2018 PVP

    The workshop will build on previous discussions which have considered the principles and requirements that should be followed to establish robust and relevant creep-continuum damage mechanics constitutive models.

    February 12, 2018

    More on the Workshop

    More on PVP

  • News

    Technology Advisory Panels Help ASME Gain Market Insight

    In December and January, thought leaders from the fields of robotics and bioengineering convened at ASME Headquarters in New York for two Technology Advisory Panel (TAP) meetings.

    March 12, 2018

    Read the article

    More ASME News

  • AABME

    From AABME: Printing Organs That Give

    To a surgeon, a useful model organ needs to be more than a rigid plastic curio. It needs the feel of the real thing if it’s to be any good for practice. Now researchers have created a 3D printed organ with the elasticity of flesh and blood.

    March 12, 2018

    Read the article

    More from AABME

  • Article

    Sailing into the Stratosphere

    90,000 feet in the air is just below the threshold for suborbital travel, nowhere near the normal altitude of the average airplane. The Perlan Project aims to change that.

    February 26, 2018

    Read the article

    More on Design & Manufacturing

  • Conference

    Check out IMECE's Design Tracks!

    This year, IMECE, the largest interdisciplinary mechanical engineering conference in the world, has seventeen design, reliability, safety, and risk tracks.

    March 12, 2018

    Check out the Design tracks

    Register for IMECE

  • Books

    Mechanics of Accuracy in Engineering Design of Machines and Robots

    Accuracy is one of the fundamental characteristics and one of the most important indexes of the quality of machines and robots.

    March 12, 2018

    Get the book

    More Books

  • News

    5 Hot Trends at CES 2018

    CES 2018 is a rocking way to begin the year, especially if you are an engineer. Held from January 9 to 12 in Las Vegas, the show provided a harbinger of what's to come in technology, devices, and trends.

    February 05, 2018

    Read the article

    More from E-Fest

  • AABME

    From AABME: Robot Helps Doctors Perform Delicate Microsurgeries

    A new robot helps surgeons suppress tremors during reconstructive microsurgeries and allows more of them to perform those delicate tasks.

    February 12, 2018

    Read the article

    More from AABME

  • Article

    Engineering and Reshoring: Creativity Matters

    Reshoring, or bringing manufacturing work back to the US, is a big issue for the manufacturing industry and the economy in general right now. As usual, efficiency and cost are the critical factors.

    January 22, 2018

    Read the article

    More on Design & Manufacturing

  • News

    Nominations Due Soon for Nearly 30 Society Awards

    The ASME Honors and Awards Committee will be accepting nominations for 29 ASME awards — including the ASME Medal, Honorary Membership and the Henry R. Worthington Medal — over the next two months.

    January 22, 2018

    Read the article

    More ASME News

  • Video

    Video: Additive Advantage

    Siemens demonstrated the potential of additive manufacturing to speed the development of turbine blade development by eliminating casting in the prototyping phase.

    February 12, 2018

    Watch the video

    More from ME Magazine

  • Journals

    CALL FOR PAPERS: Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems

    Papers are being accepted for the Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, which provides a forum for the communication, discussion, and dissemination of advanced research related to NDE, SHM and Prognosis.

    December 11, 2017

    Read the article

    More on the Journal

  • Article

    3D Printing Technologies Rise to New Levels

    Augmented polymer deposition (APD) technology makes 3D-printed parts much stronger than those made with standard materials.

    January 02, 2018

    Read the article

    More on Design & Manufacturing

  • Sponsored

    White Paper: Why Lead Screws, Plastic Nuts are Viable Alternatives to Ball Screws and Metallic Nuts

    This white paper reports on the benefits of a lead screw system made for applications requiring frequent positioning, like power transmission applications moving high axial loads. Learn about speeds and loads, lead screw geometry, nut materials, and relevant industries.

    January 16, 2018

    Read the white paper

    More on Design & Manufacturing

  • Standards

    ASME Publishes New Draft Standard for Trial Use on Additive Manufacturing

    As part of its ongoing efforts to better serve emerging technologies, ASME recently published Y14.46-2017, Product Definition for Additive Manufacturing [Draft Standard for Trial Use].

    January 16, 2018

    Read the article

    More on Standards & Certifications

  • Conference

    SAVE THE DATE: ASME 2018 V&V

    Practicing experts in diverse disciplines will be invited to submit abstracts on this emerging field. Share your expertise and leadership, gain recognition, and showcase your organization’s work by presenting at this leading conference in this rapidly evolving area.

    November 13, 2017

    Learn more about V&V

    More ASME Conferences

  • Article

    At the Nexus of Robotics and 3D Printing

    Researchers at MIT have developed a system using a 3D printer that will let non-experts design and create miniature, origami-inspired robots from 2D designs in just a few hours.

    December 11, 2017

    Read the article

    More on Design & Manufacturing

  • Membership

    SPOTLIGHTS ON: Robotics & Manufacturing

    ASME has a wealth of resources for members working in all areas of engineering technology, including these hot topics.

    December 11, 2017

    Download the Robotics brochure

    Download the Manufacturing brochure

  • News

    IMECE Keynote Speaker Chuck Hull Explores the Topic of 3D Printed Organs

    During his presentation at the Opening Keynote at the ASME 2017 International Mechanical Engineering Congress and Exposition in Tampa earlier this month, Chuck Hull discussed what he believes is an important frontier for advanced manufacturing: regenerative medicine.

    December 11, 2017

    Read the article

    More ASME News

  • Article

    Drivable Cars for Kids with Mobility Issues

    To give kids with mobility issues a way to move and explore their world independently, a new initiative is retrofitting battery-operated toy cars.

    November 13, 2017

    Read the article

    More on Design & Manufacturing

  • FutureEngineers

    New Future Engineers Challenge Asks Students to Create with Efficiency

    Space may be the final frontier, but as for actual space on the International Space Station, it’s a luxury. The recently launched Future Engineers challenge poses a simple question: Why use two things when one would be better?

    October 09, 2017

    Read the article

    More on the Two For the Crew Challenge

  • Proceedings

    Check out the IMECE 2016 Proceedings!

    IMECE 2017 has come to a close, and while the conference proceedings aren't yet available, you check out last year's in the digital collection!

    November 13, 2017

    Read the proceedings

    More from the ASME Digital Collection

See More >

ASME Center